P3) 416 OFPPk (Features & Description)



FEATURES
  • No soldering or spot weld required.
  • Assemble and Disassemble the pack easily with only 14 long screws, nuts and guide plate. 
  • Assembly time per pack (64P) only takes 15 minutes or less. 
  • Easy to interconnect between packs, no need for bus-bar.
  • Easy to connect to BMS or external load thru 10 * M5 screws on each pack.
  • Easily expandable by interconnecting using the connecting plates.
  • More connecting plates can be added to increase the current flow.
  • Nickel Contact "Fuse" can be placed on the positive or negative end side.
  • Ample air ventilation without any blockage of airflow.
  • Easy visual troubleshooting with the use of transparent plates.
  • Provide huge Red & Green coloured protective insulated cover, double as polarity indicator.
  • Self design custom labels and logos. Include template link.
  • Purely hardware, no electronics, no circuit board, no connectors and soldering to deal with.
  • Hold 64 18650 cells on each pack.
BUILD EXPANSION
Starting from a Standard Configuration to built your powerwall, you can increase to Power Configuration whenever is there's a needed. The form-factor is the same. Upgrading can be accomplish quite easily. Built Arrangement can be customise as well to suit whichever is suitable in your built.

CELLS REPLACEMENT
Be it whether is a single cell or a number of cells that need replacement, the disassembly is the same. Just the 14 long screws & nuts is what is needed. As such, the down time will cut short dramatically.

INSTALLATION
416 OFPPk pack comes complete with fully assembled positive and negative plates in a package. Users just need to pop in 64s 18650 cells to the negative plate thru the guide plate, realign the battery to the cell holders on the positive plates and tighten the 14 long screws & nuts. Inspect the contacts, put in the insulator cover. That it. Only takes about 15 minutes.

SPECIFICATION
Unit Dimension: (L400 x W98 x H83 mm)
Weight without battery: 1. 8Kg

ACCESSORIES
There'll be a number of add-on accessories which are in the planning stage. Open to ideas...

Link to:
Standard Configuration
Power Configuration
Build Arrangement
Labels and Insulator
Cell Fusing and Safety


Comments

Post a Comment